Vapour Art

GP PAPS 18500 SS Edition version 3

96,50 €
Model: GP PAPS 18500 SS Edition v3

GP PAPS® 18500 brushed finish v3 SS Edition

This is a wonderful little mod with some big features!

 

 

 

 

AUGUST 2011

GP PAPS® mod started as a project in Athens and presented first time on the Hellenic forum ekapnisma.gr LΙΝΚ on 15th September 2011. 

GP PAPSgp paps prototype

The first prototypes had brass switches and top caps with aluminium tubes. 

gp papsgp paps prototypegp paps prototype

DECEMBER 2011

In December 2011, George posted a video with a prototype GP PAPS® prototype presented on Youtube on 15th December 2011 for 18350 and 16340 batteries able to stand upright and unlocked. 

JANUARY 2012

GP PAPS® v0 came out with 303 SS welded tube, brass cap and button and circulated in Hellas and Germany. A few units have only 1 vent hole, while most of them have 4 in the tube and one in the button. 18350 was the default mode.

gp paps v0gp paps v0

FEBRUARY 2012

A full SS GP PAPS® v0 comes out and it was sold in Athens and Germany. It was made from 303 SS welded tubes and had 5 vent holes. 18350 was the default mode. 

gp paps v1gp paps v1gp paps v1gp paps v1gp paps v1

APRIL 2012

GP PAPS® v1 released internationally, it was made from 303 SS rods, it had laser engravings, 303 SS cap and button all parts in polished and brushed finish and it was available via lists from Vaporwall forum.

GP PAPS® v2 follows soon with an improved button. During that period we created an extra size, the 18800 mode for a 18650 AW IMR battery + Kick. Both versions have C-clip to hold the button and they are made from 304 SS rods. It has 4 vent holes in the tube. 18350 is the default mode and only this tube was serialised.  

gp paps v2gp paps v2GP PAPS V2

FEBRUARY 2013

GP PAPS® v2.1 was made from EU certified 304 SS rods,  it came out in polished and brushed finish with a new logo and the GP Telescopic Centre Post v2.1 instead of a hot spring, initially designed for the GP PAPS® X during August of 2012. A nut was holding the button now. It had 4 vent holes in the tube. 18350 was the default mode and only this tube was serialised. Our logo was laser engraved.

gp paps v2.1gp paps v2.1

APRIL 2013

GP PAPS® v2.5 appears in SS edition and LUX Edition and uses GP®Telescopic Centre Post v2.5. The SS edition is made from EU certified 316 SS rods. The mod has a brushed finish and polished ends, it's able to stand upright and unlocked without firing, passing the drunken vaper test, as we like to say. The button travel is 0,7 mm. The LUX Edition has its own numbering. The bottom and top caps are made from EU certified 316 SS rods and the Aluminium Bronze tubes are made from an alloy 4 times more expensive than the 316 SS. We used 25 mm OD Aluminium Bronze rods. The button and the telescopic post is 24 k gold over silver plated brass. Our logo is laser engraved in the SS Edition and CNC engraved in the Lux Edition.  It has 4 vent holes in the tube. 18350 is the default mode and only this one is serialised. The threading from now on is calibrated and the precision is increased. The switch has no knurling and we have created 4 ridges with 0,1 mm height on the bottom of the locking ring. 

 GP PAPS® v2.5 can stand upright without any need of being locked. The grooves on the top cap have been made with a different tool this time, they are smoother, less deep and more wide. Another advantage is the button fires with even less pressure than before. It is almost a touch button. 

gp paps lux v2.5gp paps lux v2.5

gp paps ss edition v2.5gp paps ss edition v2.5

DECEMBER 2013

GP PAPS® v3 begins to be produced from EU certified 316 SS rods and it will be released in February 2014. In the previous versions, we produced flat top cap and crossed top caps. No need now with the redesigned crossed grooves, their ends conclude to 1 mm opening, which is visually less obtrusive. It has no vent holes in the tube. 18500 is the default mode and only this tube is serialised with a new numbering. The vent holes have moved to the switch and they are incorporated into the design of the button in a cross-like form. GP PAPS®v3 will come out in SS Edition and Lux Edition. Both Editions will use the GPin, which replaces the GP® Telescopic Centre post and any need for further adjustments for the atomizer and the battery. The locking ring has reverse threading from now on.

gp paps v3gp paps v3gp paps v3

From now on. all the tubes will be CNC engraved with our logotype and our insignia, the aeolipile. 

GP PAPS® v3GP PAPS V3

gp paps lux v3gp paps lux v3

 

You can use the kick module with a 18350 AW IMR battery inside the 18500 tube of the GP PAPS® mod.

You can use the kick module with a 18490 AW IMR battery inside the 18650 tube of the GP PAPS® mod.

You can use the kick module with a 18650 AW IMR battery inside the 18800 tube v2.1 of the GP PAPS® mod.

We recommend AW IMR BATTERIES for this mod. 

You can register your GP PAPS® v3 SERIAL NUMBERS here

We give advance notifications via our news section of VapourArt®VaporWall, ECFUKVapersVapePitAussieVapersFacebook 

and Twitter for the upcoming batches of every product. 

 The link below is for tips & tricks about GP® Series in ECF:

GP® Series by VapourArt® - Advance Notifications, Tips & Tricks & Updates Thread

 

 

 

Out of stock!